Community & Events
Join the BestF&C Makers Community
Connect with fellow 3D printing enthusiasts, attend live events, share your builds, and grow your skills together.
What's On
Upcoming Events
Live Print Challenge — August Edition
Compete live against other makers. Each participant gets the same STL file — fastest clean print wins. Prizes for top 3.
FDM Settings Masterclass
Deep dive into slicer settings that most beginners get wrong. Layer height, infill, supports, and temperature tuning.
Resin Safety & Setup Q&A
Everything you need to know before buying your first resin printer. Safety, workspace setup, and best starter resins.
From the Community
Community Tips & Ideas
Collected wisdom from our makers — practical advice you can use today.
First Layer is Everything
Spend extra time dialing in your first layer height. A perfect first layer prevents 80% of print failures before they start.
Design for Orientation
Always think about which way your part will sit on the bed. Orienting to minimize overhangs reduces support material and print time.
Shake Your Resin
Pigments settle at the bottom of resin bottles. Shake for at least 60 seconds before every print for consistent color and curing.
Wet Sand for Smooth Results
Use wet sanding starting at 400 grit and working up to 2000. It removes layer lines without creating heat that warps thin parts.
Dry Your Filament
Moisture in filament causes stringing, bubbles, and weak layers. Dry PLA at 45°C for 4–6 hours before any critical print.
Price for Time, Not Just Material
Most makers underprice their work. Factor in machine wear, electricity, post-processing time, and your skill — not just filament cost.
Stay Connected
Stay in the Loop
Get notified about upcoming events, new challenges, and community highlights.